silicone sealant
ZJ-706CV is a single component room temperature cured dealcoholized silicone sealant, mainly used for the bonding and fixation of relays, electronic components, etc
Product features
1. Easy to use, with good extrusion workability;
2. Good adhesion, able to bond multiple substrates without the need for primer;
3. Neutral curing, non corrosive;
4. Excellent high and low temperature resistance, capable of long-term operation from -60 ℃ to 200 ℃;
5. Excellent weather aging resistance;
6. Excellent electrical insulation performance;
7. D3-D10 has low cyclic content
|
Product Name |
ZJ-706CV |
|
Colour |
White |
| Curing type | Single component dealcohol type |
|
Density, g/cm3 |
1.40±0.05 |
|
Surface drying timemin |
5~20 |
| Hardness, Shore A |
35～55 |
|
Tensile strength, MPa |
≥1.5 |
|
Elongation at break, % |
≥150 |
|
Low molecular content（D3~D10），ppm |
≤100 |
|
Volume resistance, Ω.cm |
≥1×1014 |
|
Dielectric strength, kV/mm |
≥15 |
|
Operating temperature, ℃ |
-60～200 |
- The construction site should have a good ventilation system.
- Surface treatment: The substrate surface needs to be dry and clean to remove stress, static electricity, dust, oil stains, etc.
- Bonding: Squeeze the gel onto the cleaned surface with a glue gun to distribute it evenly. If the temperature is low, the curing time will be extended.
- After applying the adhesive, please immediately assemble the components together so that the adhesive can achieve good wetting effect, which will help with the bonding effect.
- If the assembled components are stored in a dry environment (with a relative humidity of less than 50%), it is recommended to increase the humidity to ensure a suitable curing and crosslinking speed.
- matters needing attention:
- Ready to use and do not expose to air for extended periods of time.
- Maintain first in, first out use of materials.
- Use in a well ventilated area.
- Do not eat in the workplace.
- Hazard indications/safety recommendations/transportation rules:
- Wear protective gloves for long-term or repeated contact.
- Keep away from heat sources/sparks/open flames. No Smoking. Keep the container tightly closed. Use explosion-proof electrical/ventilation/lighting equipment.
- Transport according to non hazardous materials.
300ML plastic tube packaging
The product is in a sealed and cool dry condition, with a shelf life of 9 months